Mengapa Perangkat Serupa Menggunakan Kabel Lintas-Alih alih-alih Langsung-Melalui Orang?

Daftar Isi:

Mengapa Perangkat Serupa Menggunakan Kabel Lintas-Alih alih-alih Langsung-Melalui Orang?
Mengapa Perangkat Serupa Menggunakan Kabel Lintas-Alih alih-alih Langsung-Melalui Orang?

Video: Mengapa Perangkat Serupa Menggunakan Kabel Lintas-Alih alih-alih Langsung-Melalui Orang?

Video: Mengapa Perangkat Serupa Menggunakan Kabel Lintas-Alih alih-alih Langsung-Melalui Orang?
Video: Vivaldi Browser Review - Quite Underrated! - YouTube 2024, April
Anonim
Ketika menghubungkan perangkat yang sama satu sama lain, Anda mungkin bertanya-tanya mengapa satu jenis kabel tertentu digunakan daripada yang lain. Dengan memperhatikan hal itu, pos Tanya Jawab SuperUser saat ini memiliki jawaban untuk pertanyaan pembaca yang ingin tahu.
Ketika menghubungkan perangkat yang sama satu sama lain, Anda mungkin bertanya-tanya mengapa satu jenis kabel tertentu digunakan daripada yang lain. Dengan memperhatikan hal itu, pos Tanya Jawab SuperUser saat ini memiliki jawaban untuk pertanyaan pembaca yang ingin tahu.

Sesi Tanya & Jawab Hari ini hadir untuk memberi kami SuperUser - subdivisi Stack Exchange, pengelompokan situs web Q & A berbasis komunitas.

Foto milik Dom Pates (Flickr).

Pertanyaan

Pembaca pengguna SuperUser576476 ingin tahu mengapa perangkat yang serupa menggunakan kabel cross-over alih-alih yang langsung:

Why do similar devices use a cross-over cable instead of a straight-through cable?

Mengapa perangkat serupa menggunakan kabel cross-over alih-alih yang langsung?

Jawabannya

Kontributor SuperUser Eric F memiliki jawabannya untuk kami:

Definition of a Cross-Over Cable

A cross-over cable is typically used between devices with the same type of interface (i.e. computer to computer, router to router). Ethernet cables are usually made as an A or B-type interface (which simply means how it is wired).

A cross-over cable simply has an A-type on one end and a B-type on the other end.
A cross-over cable simply has an A-type on one end and a B-type on the other end.
Image
Image

What is Happening

Basically, what is happening is that the “send” and “receive” are switched so that one of the devices “send” wires goes to the other device’s “receive” wire, and visa versa with the other wire. In reality, the wires are in pairs, so there are two wires for send and two wires for receive.

If you were to use a straight-through cable (where the wires are all-in-line), then a “send” would be going to a “send” and a “receive” to a “receive”, so the devices would not be able to communicate.

Auto MDI-X

Keep in mind that many modern devices use Auto MDI-X, which is a way for a device to automatically switch the wiring method on its own. If either device on the two ends of the Ethernet cable have Auto MDI-X, then it does not matter if you use a cross-over or straight-through cable. Auto MDI-X was introduced in Gigabit Ethernet, so if either of your devices uses Gigabit, such as routers or computers, it has an extremely high chance of having Auto MDI-X already on it.

Memiliki sesuatu untuk ditambahkan ke penjelasan? Bicaralah di komentar. Ingin membaca lebih banyak jawaban dari pengguna Stack Exchange yang paham teknologi lainnya? Lihat diskusi lengkap di sini.

Direkomendasikan: